Port Door Done

I spent some quality time working on the starboard door a while ago. That post is here.

I took advantage of the good weather last weekend and got the port door done also. This door was quite a bit easier. Just a bit of sanding and spraying on the outside, and a quick wipe with polyurethane on the inside.

Continue reading

Repairing the Starboard Door – Another Project Done

This is going to be a long post about an exciting subject. Fortunately, I included lots of photos so it shouldn’t be too painful.

The starboard door developed a crack in the wood right on the edge by the lock. It’s been this way for about a year. This was the first chance I’ve had to tackle the problem and fix it for good. At least I hope I fixed it for good. You can see in this photo near the lock that the paint was failing. I knew that I would have to take it all off and repaint the door. And of course, then I would have to strip and varnish the trim around the window. That’s why I had to wait until I had a few weekends available. It was not a hard project, but waiting between coats of CPES, primer, paint, and varnish meant it would take some time to complete.

Disclaimer: I try to do the best job I can when it comes to boat projects. I don’t always know what I am doing, though. Since that doesn’t stop me, consider my efforts suspect until validated by a competent authority.

Continue reading

Painting the Flybridge Doors

The paint had failed on the doors that lead under the flybridge (I don’t know the official name for them). I took them home and went to work removing the old finish. I don’t know when they were last painted or with what kind of paint. The finish was dull. Maybe flat house paint?

  Continue reading